The use of ammonia with deNOx technologies or for flue gas conditioning can have a substantial balance-of-plant impact. Ammonia tends to adsorb on fly ash within the flue gas train as both free ammonia and ammonium-sulfate compounds. This ammonia can then desorb during subsequent transport, disposal, or use of the fly ash. This desorption of ammonia presents several technical and environmental concerns.

Various fly ashes adsorb ammonia at different rates and equilibrium concentrations. For instance, high sulfur eastern bituminous coal ashes may adsorb nearly all of the available ammonia resulting in relatively high ammonia concentrations on the ash. Ashes more basic in nature with very low sulfur content tend to adsorb much less ammonia. These variations in the adsorption capabilities of the ash make predictions difficult as to the exact amount of ammonia that will be adsorbed with respect to the amount of ammonia slip that is available. Typical ammonia-on-ash concentrations range from less than 30 ppmw to several hundred ppmw for systems experiencing ammonia slip concentrations of 2 to 5 ppmv. Thus, some units operating with very low amounts of ammonia slip (<1 ppmv) may experience ammonia-on-ash concentrations of over 100 ppmw, while other units with relatively high ammonia slip may have ashes with very low levels of adsorbed ammonia (<50 ppmw). Thus, it is important that all potential problems associated with ammonia on fly ash are well understood, prior to specifying maximum ammonia slip concentrations to potential technology suppliers.

Ammonia on fly ash presents several problems with the use or disposal of the fly ash. Typically, moisture is the controlling factor in the rate and amount of ammonia that will desorb from the fly ash. In cases where ash is placed in a pond, most or all of the ammonia may desorb into the pond water, causing environmental damage if the wastewater is released directly to adjacent tributaries and rivers. Landfilling of ammoniated fly ash may also cause leachate or runoff waters to have high concentrations of ammonia, again presenting an environmental threat.

Ammonia from contaminated fly ash desorbing into the air is also a potential problem. Ammonia in air concentrations at landfills, near processing equipment, or associated with the use of ammoniated fly ash in commercial products has the potential to produce hazardous concentrations, or concentrations that are objectionable to personnel. The behavior of ammoniated fly ash associated with its use in concrete mixtures is of special concern since a great deal of ash is used for this purpose. Ashes with high amounts of ammonia may be unacceptable for use in concrete due to odor problems associated with the mixing and pouring of the concrete. These problems are very much a function of the specific mixing conditions and final use of the concrete, and are therefore often intermittent.

W. S. Hinton & Associates is involved in ongoing research projects addressing the problems associated with ammoniated fly ash in both the plant setting as well as in end-use applications of the fly ash. In addition, we are involved in the assessment and development of beneficiation processes to remove the ammonia from fly ash, alleviating the potential problems associated with ammoniated ash. If you are experiencing or are concerned about potential ammonia problems related to fly ash, we have a great deal of experience in this area and will be glad to offer assistance.

See Also
Catalyst Development
Selective Catalytic Reduction Process
Tracking Ammonia Slip and Catalyst Deactivation

 

Home	SCR Support	Additional Services	General SCR Info
Contact Us	Ammonia on Fly Ash	Catalyst Development	Tracking Ammonia Slip and Catalyst Deactivation